Processing Ajax...







Are you sure you want to delete this item?


Are you sure you want to delete this item?

Configuring Monitor Splits for Bezel Correction

January 5, 2015
When setting up an NVIDIA Surround or AMD Eyefinity display group, it's possible to also configure custom resolutions that compensate for the space between physical monitors caused by the monitor bezels. Starting with DisplayFusion 7.0, you can configure monitor splits to also compensate for the monitor bezels.
The monitor splits allow you to have separate taskbars, wallpaper, and screen savers on each physical monitor, while still leaving Surround/Eyefinity enabled.
This guide assumes you've already enabled bezel compensation in the AMD/NVIDIA Control Panel.
The following steps are for the fairly standard setup of splitting a 3 monitor NVIDIA Surround/AMD Eyefinity group, aligned horizontally. If you've got a different Surround/Eyefinity setup, the same general steps apply, but you'll need to modify steps 4, 7, and 8 accordingly.
  1. Right-click on the DisplayFusion icon and select "Monitor Configuration" (also accessible via the "Options" tab in "Settings").
  2. Click the "Splits and Padding" button.
  3. Disable the "Auto-Fill Splits" checkbox.
  4. Use the "Preset Splits" button to select the 3x1 option.
  5. Select each split, and set the "Width" values to the actual resolution of your physical monitor (not the bezel corrected resolution).
  6. Click the "Show Preview" button.
  7. Select the middle split, and using the "Left" box in the Location group, increase the value until you see the white line on the left side of the middle monitor.
  8. Select the right split, and using the "Left" box in the Location group, increase the value until you see the white line on the left side of the right monitor.
  9. Verify that all three monitors have a white line on all four sides, then click OK, and OK again.
The video below demonstrates these steps on a Surround group that consists of 3 monitors at 1280x1024, with a bezel compensation of 50px between each monitor. The video was captured on a very wide resolution, so it's best viewed full screen with the quality set to 1080p or higher.

Top WallpaperFusion Members for December 2014

January 1, 2015
Congratulations to our top contributing members for December 2014! They have been hard at work submitting, rating, and discussing images on WallpaperFusion, and have racked up some impressive reputation scores along the way!
Nicolas Deleglise's profile on
angrysquare's profile on
Kirk Meyer's profile on
Mellou's profile on
djunet julianto's profile on
David Waterston's profile on
RowdyPants' profile on
DLJunkie's profile on
B Haws' profile on
Joseph Di Giovanni's profile on
ERIC THE RED's profile on
miracle 311's profile on
Mary Olson's profile on
Jackie Schryer's profile on
Reiki1's profile on
berke53's profile on
dibest's profile on
cortnee's profile on
mish's profile on
Tabbitha Brindle's profile on
Check out the current top members or look at previous months on our Top Members page!

Holiday Sale, DisplayFusion 7.0, CheckCentral, and More!

December 16, 2014

Update: The sale is now over, thanks everyone!

We're very excited to announce that DisplayFusion 7.0 is now available for download! This release contains a huge number of new wallpaper providers, asymmetrical monitor splitting, monitor splitting support for Surround/Eyefinity setups with bezel compensation, Scripted Functions, and much more!

Holiday Sale!

All of our desktop products are on sale at up to 40% off until January 2nd!
Check out the holiday savings on DisplayFusion, ClipboardFusion, FileSeek, iTunesFusion and LogFusion!

DisplayFusion 7.0 Highlights

  • Tons of new online wallpaper sources: Current Weather, Current Time of Day, Astronomy Picture of the Day (APOD), Google+ (formerly Picasa Web Albums), Facebook, Imgur, Instagram, Pixabay, Smugmug
  • Monitor splitting support for Surround/Eyefinity setups with bezel corrected resolutions
  • Monitor splitting support for asymmetrical split layouts
  • New Remote Control feature allows you to run DisplayFusion Functions from your phone or tablet
  • New Scripted Functions allow you to create any Function you can imagine
  • The WallpaperFusion online wallpaper source now allows you to login and filter by your favourites and ratings
  • You can now rate and comment on WallpaperFusion images from the desktop right-click menu
  • New Functions for rolling up windows to the titlebar or icon
  • You can now choose a screen saver to use for the logon screen when no users are logged in
  • Support for Windows 10 Technical Preview
  • 39 languages bundled (if you'd like to help translate DisplayFusion into your language, please contact us)
  • Many other performance, stability and bug fixes

Updating DisplayFusion

We encourage everyone to update to this new version today to take advantage of these improvements. If you've already purchased DisplayFusion, it's a lifetime license, so you can upgrade to this version at no cost! If you would like to see a complete list of all the changes, please visit the DisplayFusion Change Log. We'd like to send out a big thanks to the dozens of people who helped with the DisplayFusion translations, and the thousands of people that helped test the Beta versions. Thanks everyone!

Introducing CheckCentral

We're very excited to introduce CheckCentral, an incredible new way to manage all of your email alerts & notifications! As system administrators, we know the pain of having to wade through a pile of notification emails every day. Trying to set up some sort of system to deal with them within your inbox is a time-consuming and frustrating experience. Worst of all, there's no good way to deal with notification emails that, for whatever reason, never arrive at all. Perhaps a scheduled task on a server doesn't fire properly, and your backup application never starts to backup. That's certainly something you'd like to be made aware of! To handle that sort of scenario, CheckCentral brings intelligence to email notification management. CheckCentral will know what notifications to expect & when to expect them based on rules you set up. For more information, please see our introduction to CheckCentral!

CheckCentral Dashboard
CheckCentral Dashboard

DisplayFusion 7.0 Screenshots

Monitor Splits and Padding
Monitor Splits and Padding
Scripted Function Editor
Scripted Function Editor
DisplayFusion Remote on Android
DisplayFusion Remote on Android

Introducing new WallpaperFusion Android Apps!

December 15, 2014

We're very excited to announce 5 new Android apps for WallpaperFusion!

WallpaperFusion has so many amazing images, we wanted to simplify getting these great images, and make changing your Android wallpaper completely automatic. Just launch the app, set the timer interval, optionally select "Greyscale" or "Darken" and you're done! New images will be loaded automatically based on your settings, and your Android phone or tablet will always look amazing and fresh!

  • 100's of wallpaper images per app
  • Configurable timer intervals
  • Automatic greyscale option
  • Automatic darkening option
  • Option to only load images over WiFi to save on mobile data charges
  • 'Weather' and 'Time of Day' apps use your current location to give you relevant images!
  • No ads!

You can find the new apps here, enjoy!


Time of Day Wallpapers for Android
Time of Day Wallpapers for Android
Time of Day Wallpapers for Android
Time of Day Wallpapers for Android

Loading a Monitor Profile on Startup

December 13, 2014
To load a Monitor Profile on Windows startup, you'll need to use the DisplayFusion command line utility. Follow the steps below to load a Monitor Profile automatically on Windows startup:
  1. Open Windows Explorer ("My Computer") and navigate to C:\Program Files (x86)\DisplayFusion\.
  2. Right-click DisplayFusionCommand.exe (may just show as DisplayFusionCommand) and choose "Create Shortcut," when prompted to place it on the desktop, click Yes.
  3. Right-click the DisplayFusionCommand shortcut that was created on the desktop, and choose "Properties."
  4. Add the following to the end of the target box (make sure to leave a space before the hyphen, and enter the exact name of the Monitor Profile in the quotes):
    -monitorloadprofile "monitor profile name"
    (e.g. "C:\Program Files (x86)\DisplayFusion\DisplayFusionCommand.exe" -monitorloadprofile "Gaming")
  5. Target Profile
    Optional: Click the "General" tab and Rename the shortcut for clearer definition (e.g. "Load DF Monitor Profile.").
  6. Click OK.
  7. The procedure for adding programs to Windows Startup varies for different versions. All require the shortcut you've created to be added to the Startup folder.
  8. Open the Windows Run dialog box (Win + R). Type
    and select OK.
    Open Startup
  9. Drag the DisplayFusionCommand shortcut from the desktop location into the Startup folder.
  10. Open the DisplayFusion Settings, click the Advanced Settings button.
    Advanced Settings
  11. Search for and double-click "Don't Show Confirmation Prompt" Setting.
  12. Select "Confirmation prompts are not shown" and click OK.

iTunesFusion 2.1 Now Available

December 4, 2014

We're happy to announce that iTunesFusion 2.1 is now available for download. This version includes a few bug fixes, as well as a couple of new features.

iTunesFusion 2.1 Highlights

  • Added new folder structure tags
  • Added an option to control playlist generation
  • Resolved an issue that caused some files to by skipped during sync
  • General bug, performance, and stability fixes

Updating iTunesFusion

We encourage everyone to update to this new version today to take advantage of these improvements. If you would like to see a complete list of all the changes, please visit the iTunesFusion Change Log.


iTunesFusion Syncing
iTunesFusion Syncing
First Page
Previous Page
Next Page
Last Page